Download the latest HP Networking HP 5500-24G-4SFP HI Switch with 2 Interface Slots HP 5500 HI Switch Series JG311A device drivers (Official and Certified). HP Networking HP 5500-24G-4SFP HI Switch with 2 Interface Slots HP 5500 HI Switch Series JG311A drivers updated daily. 1 Product overview The HP A5500 HI Switch Series includes the models in Table 1. Table 1 HP A5500 HI Switch Series models Product code HP description RMN Alias.

• Access the Moonshot iLO CM firmware CLI. For more information, see.

• Enable TFTP transfers by entering the enable tftp command. For example: hpiLO->enable tftp TFTP: Server enabled.

• (Optional) If needed, copy the firmware file to the Moonshot iLO CM firmware flash repository by entering the add firmware file command. For example: hpiLO->add firmware file Loading Firmware from Upload complete: HP Moonshot–45G/180G Switch Firmware Image • Update the switch firmware by entering the update firmware command. For example: hpiLO->update firmware force sa Reading file from iLO Chassis Manager repository Updating HP Moonshot Switch Firmware Image Update status: 100% complete Update complete. NOTE: The uploaded filename used in the add firmware file command may not be the same as the filename used in the subsequent update firmware command. Enter the show firmware files command to display the name you must use with the update firmware command. • Power off and then power on the switch by entering set switch power commands.

For example: hpiLO->set switch power off force sa Switch A: Switch turned off hpiLO->set switch power on sa Switch A: Power: On • Following standard security precautions, disable TFTP access by entering the disable tftp command. Download Software Resetter Canon Mp 2800 on this page. • Copy the firmware image from the TFTP server to the alternate firmware bank of the switch: copy tftp://// alternate For example: (Routing) # copy tftp://19 Send Postscript File Directly To Printer there. 2.0.2.40/images/ alternate • Configure the switch to boot from the alternate image: (Routing) # boot system alternate • Verify the switch boot information: (Routing) # show bootvar The output for this command displays the primary, alternate, current-active, and next-active firmware file versions. • Reset the switch and boot from the new image: (Routing) # reload • After the switch finishes rebooting, verify that the firmware update was successful: (Routing) # show bootvar The output for this command shows that the switch boots the image from the alternate flash file system, but the image loads and runs in the primary flash file system. • Make a backup of the image: (Routing) # copy primary alternate.

Mirc Torrent Script Php more. For the 3Com 5500G series (Gigabit Ethernet - HP JE092A, HP JE094A, etc) Software Version 3Com OS V3.03.02s168p23 HP E5500G_03.03.02p23 Build Date: 31-Oct-2014 Posted Date: 11-Nov-2014 Size: 7.4 MB Release Notes: Note: Starting with version V3.03.02s168p07 on, HP only released 168-bit encryption for SSH, thus the 168 in all the subsequent version numbers For the non-Gigabit models, this should be a good start, try the other HP or 3Com model numbers and go from there, they are very similar switches dc.